| 2024-01 |
Effects of iron oxide and carbon nanotube contents on mechanical properties and shape memory behavior of biocompatible and biodegradable shape memory polymers |
Polymers for Advanced Technologies
|
| 2023-04 |
Fatigue and Tensile Behaviors of High Stiffness Adhesive Bonded and Hybrid Joints with Composite‑Steel Dissimilar Materials |
International Journal of Precision Engineering and Manufacturing
|
| 2023-01 |
Advances and Innovations of 3D Bioprinting Skin |
Biomolecules
|
| 2021-08 |
Volume and Distribution of Periprosthetic Bone Cysts in the Distal Tibia and Talus before Early Revision of Total Ankle Arthroplasty |
Applied Sciences-basel
|
| 2021-07 |
티타늄과 탄소 섬유 강화 PEEK로 구성된 요추 유합술용 연결봉의 의공학적 영향에 대한 비교 분석 |
Composites Research
|
| 2021-04 |
섬유 방향에 따른 복합재 피로특성에 관한 연구 |
Composites Research
|
| 2021-03 |
Potential Instability and Malfunction of Knee Joints with Vastus Medialis Impairment after Total Knee Arthroplasty |
Applied Sciences-basel
|
| 2020-07 |
Effect of insert material on forces on quadriceps, collateral ligament, and patellar tendon after rotating platform mobile-bearing total knee arthroplasty |
ASIAN JOURNAL OF SURGERY
|
| 2020-06 |
섬유 방향에 따른 에폭시 기반 복합재의 마찰 및 마모 특성에 관한 연구 |
한국트라이볼로지학회지
|
| 2020-06 |
Morphometric study of gender difference in osteoarthritis posterior tibial slope using three-dimensional magnetic resonance imaging |
SURGICAL AND RADIOLOGIC ANATOMY
|
| 2020-05 |
Definitions of unfavorable surgical outcomes and their risk factors based on disability score after spine surgery for lumbar spinal stenosis |
BMC MUSCULOSKELETAL DISORDERS
|
| 2020-05 |
Sleep Disturbance in Patients With Lumbar Spinal Stenosis Association With Disability and Quality of Life |
Clinical spine surgery (= 2016 이전 JOURNAL OF SPINAL DISORDERS & TECHNIQUES)
|
| 2020-05 |
Computational biomechanics of knee joint arthroplasty : a review
|
Mechanical Engineering Reviews
|
| 2020-05 |
Anatomy-mimetic design preserves natural kinematics of knee joint in patient-specific mobile-bearing unicompartmental knee arthroplasty |
KNEE SURGERY SPORTS TRAUMATOLOGY ARTHROSCOPY
|
| 2020-03 |
Analysis of pelvic compensation for dynamic sagittal imbalance using motion analysis |
EUROPEAN SPINE JOURNAL
|
| 2020-02 |
Biomechanical simulation for cartilage regeneration of knee joint osteoarthritis with composite scaffold using ply angle optimization |
JOURNAL OF BIOMATERIALS APPLICATIONS
|
| 2019-07 |
Design optimization of high tibial osteotomy plates using finite element analysis for improved biomechanical effect |
JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH
|
| 2019-07 |
Failure of Pelvic Compensation in Patients With Severe Positive Sagittal Imbalance: Comparison Between Static Radiographs and Gait Analysis of Spinopelvic Parameters in Adult Spinal Deformity and Lumbar Stenosis |
SPINE
|
| 2019-05 |
Gender differences in morphology exist in posterior condylar offsets of the knee in Korean population |
KNEE SURGERY SPORTS TRAUMATOLOGY ARTHROSCOPY
|
| 2019-03 |
Failure mechanism of bonded joints with similar and dissimilar material |
COMPOSITES PART B-ENGINEERING
|
| 2019-02 |
Failure Mode and Failure Strength of Homogeneous Metals & Dissimilar Metals Bonded Single Lap-Shear Joints
|
한국전산구조공학회논문집
|
| 2019-01 |
Design of a Multi-Layered Reconfigurable Frequency Selective Surface Using Water Channels |
JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY
|
| 2018-11 |
The influence of hand grip strength on surgical outcomes after surgery for degenerative lumbar spinal stenosis: a preliminary result |
SPINE JOURNAL
|
| 2018-11 |
Validation and cross‑cultural adaptation of the Korean version of the Core Outcome Measures Index in patients with degenerative lumbar disease |
EUROPEAN SPINE JOURNAL
|
| 2018-10 |
Design of a Hemispherical Reconfigurable Frequency Selective Surface Using Water Channels |
IEEE Access
|
| 2018-08 |
Analysis on Wear Phenomenon of Artificial Knee Joint Based on FEM and Mechanical Test |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
| 2018-08 |
Nonlinear finite element modeling of large deformation of nanobeams |
ACTA MECHANICA
|
| 2018-04 |
Failure load prediction of composite bolted joint with clamping force |
COMPOSITE STRUCTURES
|
| 2018-02 |
반치환 무릎 인공관절에서의 재료조합에 따른 접촉압력 분석 |
한국전산구조공학회논문집
|
| 2018-01 |
Change in pain catastrophizing in patients with lumbar spinal surgery |
SPINE JOURNAL
|
| 2017-12 |
요추전산모델의 해부학적 형상에 대한 통계학적 분석 |
Transactions of the Korean Society of Mechanical Engineers, B
|
| 2017-12 |
Statistical analysis of computed anatomical lumbar model shapes |
Transactions of the Korean Society of Mechanical Engineers, B
|
| 2017-11 |
Thermal residual stresses in FSS layer-embedded composite plates in co-cure bonding |
ADVANCED COMPOSITE MATERIALS
|
| 2017-11 |
Design and fabrication of a reconfigurable frequency selective surface using fluidic channels |
JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY
|
| 2017-11 |
Design of Active Frequency Selective Surface with Curved Composite Structures and Tunable Frequency Response |
INTERNATIONAL JOURNAL OF ANTENNAS AND PROPAGATION
|
| 2017-10 |
Fabrication of Hybrid Composite Plates with an Active Frequency Selective Surface |
Composites Research
|
| 2017-08 |
Probabilistic evaluation of the material properties of the in vivo subject-specific articular surface using a computational model |
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
|
| 2017-05 |
Experimental Study on Failure Mechanism of Single Lap-shear Bond Joint with Dissimilar Materials |
Journal of Physics: Conference Series
|
| 2017-03 |
Experimental study on failure mechanism of hybrid composite joints with different adhesives |
FIBERS AND POLYMERS
|
| 2017-01 |
유연한 구조를 갖는 X-Band 재구성 주파수 선택구조 설계 |
한국전자파학회 논문지
|
| 2016-12 |
Computational model-based probabilistic analysis of in vivo material properties for ligament stiffness using the laxity test and computed tomography |
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
|
| 2016-11 |
Influence of Dentoalveolar Ankylosis on the Biomechanical Response of a Single-rooted Tooth and Surrounding Alveolar Bone: A 3-dimensional Finite Element Analysis |
JOURNAL OF ENDODONTICS
|
| 2016-09 |
격리도가 향상된 X-Band 재구성 주파수 선택 표면구조 설계 |
한국전자파학회 논문지
|
| 2016-07 |
Design of X-band reconfigurable frequency selective surface with high isolation |
IEICE ELECTRONICS EXPRESS
|
| 2016-02 |
Fast scattering analysis over a wide frequency band using Clenshaw-Lord-type Pade-Chebyshev approximation |
IET MICROWAVES ANTENNAS & PROPAGATION
|
| 2015-12 |
Change of transmission characteristics of FSSs in hybrid composites due to residual stresses |
STEEL AND COMPOSITE STRUCTURES
|
| 2015-12 |
Probabilistic approach for determining the material properties of meniscal attachments in vivo using magnetic resonance imaging and a finite element model |
JOURNAL OF COMPUTATIONAL BIOLOGY
|
| 2015-06 |
In vivo evaluation of the subject-specific finite element model for knee joint cartilage contact area |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
| 2015-04 |
The influence of intrinsic disc degeneration of the adjacent segments on its stress distribution after one-level lumbar fusion |
EUROPEAN SPINE JOURNAL
|
| 2015-03 |
Influence of Apical Root Resection on the Biomechanical Response of a Single-rooted Tooth-Part 2: Apical Root Resection Combined with Periodontal Bone Loss |
JOURNAL OF ENDODONTICS
|
| 2015-01 |
Residual stress and electromagnetic characteristics in loop type frequency selective surface embedded hybrid structures |
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
|
| 2015-01 |
Comparing an Instrumented Posterior Fixation System with Rigid and Semi-Flexible Rods using Finite Element Analysis |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
| 2015-01 |
Finite Element Analysis for Comparison of Spinous Process Osteotomies Technique with Conventional Laminectomy as Lumbar Decompression Procedure |
YONSEI MEDICAL JOURNAL
|
| 2014-12 |
굽힘 하중을 받는 복합재 기계적 체결부의 강도예측에 관한 연구 |
Composites Research
|
| 2014-11 |
Scattering analysis of curved FSS using Floquet harmonics and asymptotic waveform evaluation technique |
STEEL AND COMPOSITE STRUCTURES
|
| 2014-09 |
Influence of Apical Root Resection on the Biomechanical Response of a Single-rooted Tooth: A 3-dimensional Finite Element Analysis |
JOURNAL OF ENDODONTICS
|
| 2014-08 |
Prediction of elastic properties for woven z-pinned composites |
COMPOSITES PART B-ENGINEERING
|
| 2014-08 |
Optimal Strength Design of Composite Bicycle Wheels |
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING
|
| 2014-06 |
곡면 재구성 주파수 선택막의 투과특성 |
한국군사과학기술학회지
|
| 2014-05 |
Analysis of FSS Radomes Based on Physical Optics Method and Ray Tracing Technique |
IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS
|
| 2014-01 |
Transmission characteristics of a composite made with ground granulated blast furnace slag |
IEICE ELECTRONICS EXPRESS
|
| 2014-01 |
패치 배열과 그리드 구조를 이용한 재구성 주파수 선택 구조 설계 |
한국전자파학회 논문지
|
| 2013-12 |
주파수 선택막이 삽입된 복합재 평판의 잔류 열응력과스프링 백 효과 |
한국전산구조공학회논문집
|
| 2013-12 |
치조골흡수 유형에 따른 치근단 절제술의 수술적 평가에 관한 연구 |
한국전산구조공학회논문집
|
| 2013-11 |
루프 종류의 FSS가 결합된 복합재료 구조의 잔류응력과 전파 투과 특성 |
한국복합재료학회지
|
| 2013-10 |
The biomechanical influence of the facet joint orientation and the facet tropism in the lumbar spine |
SPINE JOURNAL
|
| 2013-09 |
슬래그 입자의 크기 및 체적비에 따른 슬래그 입자강화 복합재료의 기계적 특성 연구 |
한국복합재료학회지
|
| 2013-04 |
N-pole 종류의 FSS가 결합된 복합재료 구조의잔류응력과 전파투과특성 |
한국전산구조공학회논문집
|
| 2013-03 |
Burn-wound healing effect of gelatin/polyurethane nanofiber scaffold containing silver-sulfadiazine. |
JOURNAL OF BIOMEDICAL NANOTECHNOLOGY
|
| 2013-02 |
복합재료 라미네이트 경량화 자전거 프레임의 강도 설계 |
대한기계학회논문집 A
|
| 2012-12 |
유한크기 FSS의 곡률효과에 따른 주파수 특성 해석 |
한국군사과학기술학회지
|
| 2012-11 |
Gait cycle comparions of cruciate sacrifice for total knee design.-explicit finite element |
International Journal of Precision Engineering and Manufacturing
|
| 2012-10 |
적층각을 고려한 복합재료 라미네이트 자전거 휠의 설계 |
한국복합재료학회지
|
| 2012-10 |
Surgical Outcome of Lumbar Fusion Surgery in Patients With Parkinson Disease |
JOURNAL OF SPINAL DISORDERS & TECHNIQUES
|
| 2012-09 |
The Biomechanical Effect of Pedicle Screws' Insertion Angle and Position on the Superior Adgacent Segment in 1 Segment Lumbar Fusion |
SPINE
|
| 2012-08 |
Finite Element Analysis of Instrumented Posterior Lumbar Interbody Fusion Cages for Reducing Stress Shielding Effects: Comparison of the CFRP cage and Titanium cage |
한국복합재료학회지
|
| 2012-08 |
Effects of Lumbar Arthrodesis on Adjacent Segments Differences Between Surgical Techniques |
SPINE
|
| 2012-06 |
Design of a composite roll bar for the improvement of bus rollover crashworthiness |
COMPOSITES PART B-ENGINEERING
|
| 2012-04 |
구형 유전체 위에 있는 구형 패치의 공진 특성과 방사 특성 |
한국전자파학회 논문지
|
| 2012-03 |
Tissue Engineering of the Intervertebral Disc With Cultured Nucleus Pulposus Cells Using Atelocollagen Scaffold and Growth Factors |
SPINE
|
| 2011-12 |
Simple design method of FSS radome analysis using equivalent circuit model |
IEICE ELECTRONICS EXPRESS
|
| 2011-08 |
The Quantitative Assessment of Risk Factors to Overstress at Adjacent Segments After Lumbar Fusion Removal of Posterior Ligaments and Pedicle Screws |
SPINE
|
| 2011-06 |
Damage Detection of Composite Plates Using Finite Element Analysis Based on Structural Health Monitoring |
Journal of Materials Science and Engineering B
|
| 2011-04 |
The Risk Assessment of a Fall in Patients With Lumbar Spinal Stenosis |
SPINE
|
| 2011-02 |
주파수 선택적 투과막이 결합된 복합재료의 잔류응력평가 및 선택적 투과막 설계 |
한국복합재료학회지
|
| 2011-01 |
Quantitative Accessibility of Delamination in Composite Using Lamb Wave by Experiments and FEA |
ADVANCED COMPOSITE MATERIALS
|
| 2011-01 |
Simple prediction of FSS radome transmission characteristics using an FSS equivalent circuit model |
IEICE ELECTRONICS EXPRESS
|
| 2010-12 |
인공고관절 전치환술에서 세라믹 볼 헤드의 기계적 안정성 평가를 위한 유한요소 해석 |
의공학회지 (Journal of Biomedical Engineering Research)
|
| 2010-09 |
Effect of Z-pin on the through-the-thickness strength of woven composite laminates |
Advanced Materials Research
|
| 2010-09 |
Determination of number of layers and stacking sequence of composite bicycle frame |
Advanced Materials Research
|
| 2010-09 |
The relation between rotation deformity and nerve root stress in lumbar scoliosis |
International Journal Of Modern Physics B
|
| 2010-09 |
Study of composite plate damages using embedded PZT sensors with various center frequency |
International Journal Of Modern Physics B
|
| 2010-07 |
Analysis of biomechanical changes after removal of instrumentation in lumbar arthrodesis by finite element analysis |
Medical & Biological Engineering & Computing
|